|
|
|
|
Pan & Tilt Projects
Easy Pan and Tilt servo mount
I made this Pan and Tilt with 2) Hi-tec servos HS-81, HS-65HB and the stock camera bracket. The HS-81 is modified to turn 180o (twinturbostang Mod at RCG also on this site). This was easy and took only an hour to make. I first took the bottom of the HS-65 off drilling a hole for a small bolt to go through. This will be the pivot on the opposite end of the servo gear. I then mounted the stock camera bracket to the modified HS-81 and once that was done I then mounted the HS-65 to the KX-151 camera bracket. 
 Hi-Tec HS-65HB
More Pan n Tilt set-ups  Photo. AndrésMtnez 
 Photo dklassen
 Photos twinturbostang
 Photo absolute-zero  This is available Roboshop.com
 You can get this at Rc-tech.ch
 you can by this at dpcav.com
 Photo rob10000
 Photo rob10000
 Photo Peteschug  Photo vrflyer
 
|
|
This web-site contains Copy Righted material and may not be used in any shape or written form without permission. ©2003-08 FPVvideo.com, FPVpilot.com, Off-Road Video Productions (ORVP), all rights reserved.
Site sponsors wanted. If your company would like to advertise on this site please contact us by email. Send mail to
orvpro@msn.com with
questions or comments about this web site.
|
